网站空间的管理站点/营销推广渠道

Loop initialization and closing

In libuv 0.10 (and previous versions), loops were created with uv_loop_new, which allocated memory for a new loop and initialized it; and destroyed withuv_loop_delete, which destroyed the loop and freed the memory. Starting with 1.0, those are deprecated and the user is responsible for allocating the memory and then initializing the loop.

libuv 0.10

uv_loop_t* loop = uv_loop_new();
...
uv_loop_delete(loop);

libuv 1.0

uv_loop_t* loop = malloc(sizeof *loop);
uv_loop_init(loop);
...
uv_loop_close(loop);
free(loop);

Error handling

Error handling had a major overhaul in libuv 1.0. In general, functions and status parameters would get 0 for success and -1 for failure on libuv 0.10, and the user had to use uv_last_error to fetch the error code, which was a positive number.

In 1.0, functions and status parameters contain the actual error code, which is 0 for success, or a negative number in case of error.

libuv 0.10

... assume 'server' is a TCP server which is already listening
r = uv_listen((uv_stream_t*) server, 511, NULL);
if (r == -1) {uv_err_t err = uv_last_error(uv_default_loop());/* err.code contains UV_EADDRINUSE */
}

libuv 1.0

... assume 'server' is a TCP server which is already listening
r = uv_listen((uv_stream_t*) server, 511, NULL);
if (r < 0) {/* r contains UV_EADDRINUSE */
}

Threadpool changes

In libuv 0.10 Unix used a threadpool which defaulted to 4 threads, while Windows used the QueueUserWorkItem API, which uses a Windows internal threadpool, which defaults to 512 threads per process.

In 1.0, we unified both implementations, so Windows now uses the same implementation Unix does. The threadpool size can be set by exporting theUV_THREADPOOL_SIZE environment variable. See Thread pool work scheduling.

Allocation callback API change

In libuv 0.10 the callback had to return a filled uv_buf_t by value:

uv_buf_t alloc_cb(uv_handle_t* handle, size_t size) {return uv_buf_init(malloc(size), size);
}

In libuv 1.0 a pointer to a buffer is passed to the callback, which the user needs to fill:

void alloc_cb(uv_handle_t* handle, size_t size, uv_buf_t* buf) {buf->base = malloc(size);buf->len = size;
}

Unification of IPv4 / IPv6 APIs

libuv 1.0 unified the IPv4 and IPv6 APIS. There is no longer a uv_tcp_bind and uv_tcp_bind6 duality, there is only uv_tcp_bind() now.

IPv4 functions took struct sockaddr_in structures by value, and IPv6 functions took struct sockaddr_in6. Now functions take a struct sockaddr* (note it’s a pointer). It can be stack allocated.

libuv 0.10

struct sockaddr_in addr = uv_ip4_addr("0.0.0.0", 1234);
...
uv_tcp_bind(&server, addr)

libuv 1.0

struct sockaddr_in addr;
uv_ip4_addr("0.0.0.0", 1234, &addr)
...
uv_tcp_bind(&server, (const struct sockaddr*) &addr, 0);

The IPv4 and IPv6 struct creating functions (uv_ip4_addr() and uv_ip6_addr()) have also changed, make sure you check the documentation.

..note::

This change applies to all functions that made a distinction between IPv4 and IPv6 addresses.

Streams / UDP data receive callback API change

The streams and UDP data receive callbacks now get a pointer to a uv_buf_t buffer, not a structure by value.

libuv 0.10

void on_read(uv_stream_t* handle,ssize_t nread,uv_buf_t buf) {...
}void recv_cb(uv_udp_t* handle,ssize_t nread,uv_buf_t buf,struct sockaddr* addr,unsigned flags) {...
}

libuv 1.0

void on_read(uv_stream_t* handle,ssize_t nread,const uv_buf_t* buf) {...
}void recv_cb(uv_udp_t* handle,ssize_t nread,const uv_buf_t* buf,const struct sockaddr* addr,unsigned flags) {...
}

Receiving handles over pipes API change

In libuv 0.10 (and earlier versions) the uv_read2_start function was used to start reading data on a pipe, which could also result in the reception of handles over it. The callback for such function looked like this:

void on_read(uv_pipe_t* pipe,ssize_t nread,uv_buf_t buf,uv_handle_type pending) {...
}

In libuv 1.0, uv_read2_start was removed, and the user needs to check if there are pending handles using uv_pipe_pending_count() and uv_pipe_pending_type()while in the read callback:

void on_read(uv_stream_t* handle,ssize_t nread,const uv_buf_t* buf) {...while (uv_pipe_pending_count((uv_pipe_t*) handle) != 0) {pending = uv_pipe_pending_type((uv_pipe_t*) handle);...}...
}

Extracting the file descriptor out of a handle

While it wasn’t supported by the API, users often accessed the libuv internals in order to get access to the file descriptor of a TCP handle, for example.

fd = handle->io_watcher.fd;

This is now properly exposed through the uv_fileno() function.

uv_fs_readdir rename and API change

uv_fs_readdir returned a list of strings in the req->ptr field upon completion in libuv 0.10. In 1.0, this function got renamed to uv_fs_scandir(), since it’s actually implemented using scandir(3).

In addition, instead of allocating a full list strings, the user is able to get one result at a time by using the uv_fs_scandir_next() function. This function does not need to make a roundtrip to the threadpool, because libuv will keep the list of dents returned by scandir(3) around.