专业集团网站建设/谷歌chrome浏览器
实验目的：从eMMC启动Linux系统
Step1:确定eMMC被挂在哪个设备
哪个设备含有boot0分区和boot1分区，就是eMMC。实验中是位于mmcblk1上。
root@am64xx-evm:~# ls -l /dev/mmcblk*
brw-rw---- 1 root disk 179, 0 Feb 27 13:25 /dev/mmcblk0
brw-rw---- 1 root disk 179, 1 Feb 27 13:25 /dev/mmcblk0p1
brw-rw---- 1 root disk 179, 2 Feb 27 13:25 /dev/mmcblk0p2
brw-rw---- 1 root disk 179, 32 Feb 27 13:25 /dev/mmcblk1
brw-rw---- 1 root disk 179, 64 Feb 27 13:25 /dev/mmcblk1boot0
brw-rw---- 1 root disk 179, 96 Feb 27 13:25 /dev/mmcblk1boot1
brw-rw---- 1 root disk 179, 33 Feb 27 13:25 /dev/mmcblk1p1
crw------- 1 root root 237, 0 Feb 27 13:25 /dev/mmcblk1rpmbStep2:将U-Boot固件写入eMMC boot0分区
固件包含tiboot3.bin、tispl.bin和u-boot.img。
首先启用对boot0分区的写访问：
# echo 0 > /sys/block/mmcblk1boot0/force_ro
然后，使用命令dd将二进制文件写入eMMC boot0。seek根据eMMC layout确定。
root@am64xx-evm:~# dd if=tiboot3.bin of=/dev/mmcblk1boot0 seek=0
1122+1 records in
1122+1 records out
574718 bytes (575 kB, 561 KiB) copied, 0.0527893 s, 10.9 MB/s
root@am64xx-evm:~# dd if=tispl.bin of=/dev/mmcblk1boot0 seek=2048
1762+1 records in
1762+1 records out
902455 bytes (902 kB, 881 KiB) copied, 0.0816649 s, 11.1 MB/s
root@am64xx-evm:~# dd if=u-boot.img of=/dev/mmcblk1boot0 seek=6144
2210+1 records in
2210+1 records out
1131919 bytes (1.1 MB, 1.1 MiB) copied, 0.103442 s, 10.9 MB/sStep3:Flash Kernel, Device Tree and Root Filesystem to eMMC
- 首先，需要在用户分区中创建一个ext4分区：
Enter “p” to display current partitions
Enter “n” to create a new partition (or enter “d” first to delete existing partitions)
Use default for all subsequent options
Enter “w” to write the partition table to disk and exitfdisk /dev/mmcblk1 - 新分区中创建ext4文件系统:
mkfs.ext4 /dev/mmcblk1p1 - 将tisdk-default-image-am64xx-evm.tar.xz拷贝到/home/root：
# mkdir -p /mnt/temp # mount -t ext4 /dev/mmcblk1p1 /mnt/temp # cd /mnt/temp # tar xf <Linux image file copied from the host> # cd .. # umount temp
Step4:Change Boot Mode and U-Boot Env
重启EVM，停止自动引导，进入U-Boot提示。发出以下命令，让ROM访问eMMC引导分区(这只需要做一次):
=> mmc partconf 0 1 1 1
=> mmc bootbus 0 2 0 0
接下来切换到eMMC启动模式。如何将EVM引导模式开关设置为从eMMC启动，请参考EVM引导模式开关。
重新启动EVM以引导到U-Boot提示符，然后发出以下命令来更改eMMC引导的U-Boot环境变量:
=> setenv mmcdev 0
=> setenv bootpart 0
=> saveenv
过程记录：
root@am64xx-evm:~# fdisk /dev/mmcblk1Welcome to fdisk (util-linux 2.35.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.Command (m for help): p
Disk /dev/mmcblk1: 14.84 GiB, 15913189376 bytes, 31080448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 12EB7D78-3DFA-4666-8DDB-818D1927EC6BDevice Start End Sectors Size Type
/dev/mmcblk1p1 34 31080414 31080381 14.8G Microsoft basic dataCommand (m for help): d
Selected partition 1
Partition 1 has been deleted.Command (m for help): p
Disk /dev/mmcblk1: 14.84 GiB, 15913189376 bytes, 31080448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 12EB7D78-3DFA-4666-8DDB-818D1927EC6BCommand (m for help): n
Partition number (1-128, default 1): 1
First sector (34-31080414, default 2048): q
Value out of range.
First sector (34-31080414, default 2048): 31080414
Last sector, +/-sectors or +/-size{K,M,G,T,P} (31080414-31080414, default 31080414):Created a new partition 1 of type 'Linux filesystem' and of size 512 B.Command (m for help): p
Disk /dev/mmcblk1: 14.84 GiB, 15913189376 bytes, 31080448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 12EB7D78-3DFA-4666-8DDB-818D1927EC6BDevice Start End Sectors Size Type
/dev/mmcblk1p1 31080414 31080414 1 512B Linux filesystemroot@am64xx-evm:~# ls -l /dev/mmcblk1*
brw-rw---- 1 root disk 179, 32 Feb 27 13:33 /dev/mmcblk1
brw-rw---- 1 root disk 179, 64 Feb 27 13:29 /dev/mmcblk1boot0
brw-rw---- 1 root disk 179, 96 Feb 27 13:25 /dev/mmcblk1boot1
brw-rw---- 1 root disk 179, 33 Feb 27 13:33 /dev/mmcblk1p1
crw------- 1 root root 237, 0 Feb 27 13:25 /dev/mmcblk1rpmb
root@am64xx-evm:~# mkfs.ext4 /dev/mmcblk0p1
mke2fs 1.45.7 (28-Jan-2021)
/dev/mmcblk0p1 contains a vfat file system labelled 'boot'
Proceed anyway? (y,N) ^[[A^H^H^H^H^H^H^H^H^H^H^H^H^H^H^H^Hn^H^Hnnnnroot@am64xx-evm:~# mkfs.ext4 /dev/mmcblk1p1
mke2fs 1.45.7 (28-Jan-2021)
/dev/mmcblk1p1 contains a ext4 file systemlast mounted on / on Mon Feb 27 13:25:28 2023
Proceed anyway? (y,N) y
/dev/mmcblk1p1 is mounted; will not make a filesystem here!U-Boot SPL 2021.01-g2ee8efd654 (Feb 27 2023 - 13:45:51 +0000)
Resetting on cold boot to workaround ErrataID:i2331
resetting ...U-Boot SPL 2021.01-g2ee8efd654 (Feb 27 2023 - 13:45:51 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
SPL initial stack usage: 13424 bytes
Trying to boot from MMC1
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
init_env from device 9 not supported!
Starting ATF on ARM64 core...NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty
NOTICE: BL31: Built : 13:45:56, Feb 27 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Mon Feb 27 13:46:53 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world bootU-Boot SPL 2021.01-g2ee8efd654 (Feb 27 2023 - 13:48:24 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
Trying to boot from MMC1
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encryptedU-Boot 2021.01-g2ee8efd654 (Feb 27 2023 - 13:48:24 +0000)SoC: AM64X SR1.0 GP
Model: Texas Instruments AM642 EVM
Board: AM64-GPEVM rev A
DRAM: 2 GiB
NAND: 0 MiB
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from FAT... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
1490 bytes read in 2 ms (727.5 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc1 ...
Running uenvcmd ...
1 bytes read in 1 ms (1000 Bytes/s)
Already setup.
19147264 bytes read in 760 ms (24 MiB/s)
56196 bytes read in 5 ms (10.7 MiB/s)
## Flattened Device Tree blob at 88000000Booting using the fdt blob at 0x88000000Loading Device Tree to 000000008feef000, end 000000008fffffff ... OKStarting kernel ...[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.168-g2c23e6c538 (oe-user@oe-host) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Mon Feb 27 14:16:24 UTC 2023
[ 0.000000] Machine model: Texas Instruments AM642 EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node m4f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a57fffff]
[ 0.000000] node 0: [mem 0x00000000a5800000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 512 MiB at 0x00000000dd000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s51288 r8192 d30632 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=fc40000.spi.0:1m(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=47b6d3e0-02 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1398792K/2097152K available (11200K kernel code, 1162K rwdata, 4308K rodata, 1920K init, 431K bss, 174072K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001840000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000080030000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000005] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008584] Console: colour dummy device 80x25
[ 0.013181] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023857] pid_max: default: 32768 minimum: 301
[ 0.028683] LSM: Security Framework initializing
[ 0.033473] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.041048] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.051013] rcu: Hierarchical SRCU implementation.
[ 0.056268] Platform MSI: msi-controller@1820000 domain created
[ 0.062659] PCI/MSI: /bus@f4000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.071969] EFI services will not be available.
[ 0.076885] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.090481] Detected VIPT I-cache on CPU1
[ 0.090521] GICv3: CPU1: found redistributor 1 region 0:0x0000000001860000
[ 0.090536] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000
[ 0.090603] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.090736] smp: Brought up 1 node, 2 CPUs
[ 0.120116] SMP: Total of 2 processors activated.
[ 0.124930] CPU features: detected: 32-bit EL0 Support
[ 0.130206] CPU features: detected: CRC32 instructions
[ 0.143760] CPU: All CPU(s) started at EL2
[ 0.147968] alternatives: patching kernel code
[ 0.153758] devtmpfs: initialized
[ 0.165541] KASLR disabled due to lack of seed
[ 0.170347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.180326] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.204778] pinctrl core: initialized pinctrl subsystem
[ 0.210849] DMI not present or invalid.
[ 0.215572] NET: Registered protocol family 16
[ 0.222033] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.229411] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.237512] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.246333] thermal_sys: Registered thermal governor 'step_wise'
[ 0.246341] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.252961] cpuidle: using governor menu
[ 0.263920] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.270931] ASID allocator initialised with 65536 entries
[ 0.306508] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.313400] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.320252] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.327103] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.335330] cryptd: max_cpu_qlen set to 1000
[ 0.343373] k3-chipinfo 43000014.chipid: Family:AM64X rev:SR1.0 JTAGID[0x0bb3802f] Detected
[ 0.352829] vsys_5v0: supplied by evm_12v0
[ 0.357667] vsys_3v3: supplied by evm_12v0
[ 0.362507] vddb_3v3_display: supplied by vsys_3v3
[ 0.368726] iommu: Default domain type: Translated
[ 0.374159] SCSI subsystem initialized
[ 0.378706] mc: Linux media interface: v0.10
[ 0.383106] videodev: Linux video capture interface: v2.00
[ 0.388803] pps_core: LinuxPPS API ver. 1 registered
[ 0.393875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.403221] PTP clock support registered
[ 0.407261] EDAC MC: Ver: 3.0.0
[ 0.411360] omap-mailbox 29020000.mailbox: omap mailbox rev 0x66fc9100
[ 0.418293] omap-mailbox 29040000.mailbox: omap mailbox rev 0x66fc9100
[ 0.425120] omap-mailbox 29060000.mailbox: omap mailbox rev 0x66fc9100
[ 0.432656] FPGA manager framework
[ 0.436246] Advanced Linux Sound Architecture Driver Initialized.
[ 0.443666] clocksource: Switched to clocksource arch_sys_counter
[ 0.450189] VFS: Disk quotas dquot_6.6.0
[ 0.454272] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.467822] NET: Registered protocol family 2
[ 0.472572] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.481573] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.490378] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.498607] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.506359] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.513306] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.520214] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.527727] NET: Registered protocol family 1
[ 0.532868] RPC: Registered named UNIX socket transport module.
[ 0.538964] RPC: Registered udp transport module.
[ 0.543771] RPC: Registered tcp transport module.
[ 0.548577] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.555168] NET: Registered protocol family 44
[ 0.559725] PCI: CLS 0 bytes, default 64
[ 0.564571] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.577507] Initialise system trusted keyrings
[ 0.582366] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.593366] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.600170] NFS: Registering the id_resolver key type
[ 0.605434] Key type id_resolver registered
[ 0.609711] Key type id_legacy registered
[ 0.613893] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.620747] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.628539] 9p: Installing v9fs 9p2000 file system support
[ 0.677768] Key type asymmetric registered
[ 0.681982] Asymmetric key parser 'x509' registered
[ 0.687027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.694588] io scheduler mq-deadline registered
[ 0.699223] io scheduler kyber registered
[ 0.705933] pinctrl-single 4084000.pinctrl: 33 pins, size 132
[ 0.712396] pinctrl-single f4000.pinctrl: 180 pins, size 720
[ 0.719358] pinctrl-single a40000.timesync-router: 512 pins, size 2048
[ 0.736392] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.759831] brd: module loaded
[ 0.771242] loop: module loaded
[ 0.775569] megasas: 07.714.04.00-rc1
[ 0.784243] tun: Universal TUN/TAP device driver, 1.6
[ 0.790257] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.796693] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.802804] sky2: driver version 1.30
[ 0.807971] VFIO - User Level meta-driver version: 0.3
[ 0.814556] i2c /dev entries driver
[ 0.819871] sdhci: Secure Digital Host Controller Interface driver
[ 0.826207] sdhci: Copyright(c) Pierre Ossman
[ 0.831123] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.838264] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.844947] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.853390] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.857994] optee: revision 3.20 (8e74d476)
[ 0.874632] optee: dynamic shared memory is enabled
[ 0.884370] optee: initialized driver
[ 0.890998] NET: Registered protocol family 17
[ 0.895787] 9pnet: Installing 9P2000 support
[ 0.900241] Key type dns_resolver registered
[ 0.905133] Loading compiled-in X.509 certificates
[ 0.928844] ti-sci 44043000.dmsc: lpm region is required for suspend but not provided.
[ 0.937066] ti-sci 44043000.dmsc: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar')
[ 0.996606] omap-gpmc 3b000000.memory-controller: GPMC revision 6.0
[ 1.003090] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[ 1.011746] omap_i2c 20000000.i2c: bus 0 rev0.12 at 100 kHz
[ 1.019603] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 1.026570] pca953x 1-0022: using AI
[ 1.081263] Console: switching to mono frame buffer device 12x2
[ 1.116151] ssd1307fb 1-003c: fb0: Solomon SSD1307 framebuffer device registered, using 192 bytes of video memory
[ 1.126864] omap_i2c 20010000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.133997] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz
[ 1.141014] omap_i2c 20030000.i2c: bus 3 rev0.12 at 100 kHz
[ 1.147312] ti-sci-intr bus@f4000:bus@4000000:interrupt-controller1: Interrupt Router 5 domain created
[ 1.157311] ti-sci-intr bus@f4000:interrupt-controller0: Interrupt Router 3 domain created
[ 1.166192] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[ 1.187398] j721e-pcie f102000.pcie: host bridge /bus@f4000/pcie@f102000 ranges:
[ 1.195082] j721e-pcie f102000.pcie: IO 0x0068001000..0x0068010fff -> 0x0068001000
[ 1.203372] j721e-pcie f102000.pcie: MEM 0x0068011000..0x006fffffff -> 0x0068011000
[ 1.211665] j721e-pcie f102000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x0000000000
[ 2.224390] j721e-pcie f102000.pcie: PCI host bridge to bus 0000:00
[ 2.230834] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.236447] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x68001000-0x68010fff])
[ 2.246140] pci_bus 0000:00: root bus resource [mem 0x68011000-0x6fffffff]
[ 2.253210] pci 0000:00:00.0: [104c:b010] type 01 class 0x060400
[ 2.259366] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xfffffffff 64bit pref]
[ 2.266915] pci 0000:00:00.0: supports D1
[ 2.271015] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.279607] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.290315] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.297145] pci 0000:00:00.0: BAR 0: no space for [mem size 0x1000000000 64bit pref]
[ 2.305067] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x1000000000 64bit pref]
[ 2.313343] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.319008] pcieport 0000:00:00.0: PME: Signaling with IRQ 44
[ 2.325779] ti-udma 485c0100.dma-controller: Number of rings: 68
[ 2.333370] ti-udma 485c0100.dma-controller: Channels: 24 (bchan: 12, tchan: 6, rchan: 6)
[ 2.343606] ti-udma 485c0000.dma-controller: Number of rings: 288
[ 2.358370] ti-udma 485c0000.dma-controller: Channels: 44 (tchan: 29, rchan: 15)
[ 2.369464] printk: console [ttyS2] disabled
[ 2.373930] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 16, base_baud = 3000000) is a 8250
[ 2.382699] printk: console [ttyS2] enabled
[ 2.382699] printk: console [ttyS2] enabled
[ 2.391143] printk: bootconsole [ns16550a0] disabled
[ 2.391143] printk: bootconsole [ns16550a0] disabled
[ 2.405303] spi-nor spi0.0: s28hs512t (65536 Kbytes)
[ 2.410343] 7 cmdlinepart partitions found on MTD device fc40000.spi.0
[ 2.416868] Creating 7 MTD partitions on "fc40000.spi.0":
[ 2.422265] 0x000000000000-0x000000100000 : "ospi.tiboot3"
[ 2.429120] 0x000000100000-0x000000300000 : "ospi.tispl"
[ 2.435762] 0x000000300000-0x000000700000 : "ospi.u-boot"
[ 2.442359] 0x000000700000-0x000000740000 : "ospi.env"
[ 2.448733] 0x000000740000-0x000000780000 : "ospi.env.backup"
[ 2.455769] 0x000000800000-0x000003fc0000 : "ospi.rootfs"
[ 2.462392] 0x000003fc0000-0x000004000000 : "ospi.phypattern"
[ 2.482867] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
[ 2.527673] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 2.536869] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867
[ 2.545121] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA00903, cpsw version 0x6BA80903 Ports: 3 quirks:00000006
[ 2.557998] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.4
[ 2.565128] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[ 2.571894] pps pps0: new PPS source ptp0
[ 2.576338] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:1
[ 2.586968] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 16
[ 2.597927] am65-cpts 39000000.cpts: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0
[ 2.607079] k3-j72xx-soc-thermal b00000.temperature-sensor: invalid resource
[ 2.614199] k3-j72xx-soc-thermal: probe of b00000.temperature-sensor failed with error -22
[ 2.625085] mmc0: CQHCI version 5.10
[ 2.626149] gpio-mux mux-controller: 2-way mux-controller registered
[ 2.644064] vdd_mmc1: supplied by vsys_3v3
[ 2.656381] debugfs: Directory 'pd:114' with parent 'pm_genpd' already present!
[ 2.656438] mmc1: CQHCI version 5.10
[ 2.663908] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[ 2.680405] ALSA device list:
[ 2.683396] No soundcards found.
[ 2.712280] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 2.720700] Waiting for root device PARTUUID=47b6d3e0-02...
[ 2.777674] mmc0: Command Queue Engine enabled
[ 2.782173] mmc0: new HS200 MMC card at address 0001
[ 2.788020] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 2.792946] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB
[ 2.799014] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 2.805784] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB
[ 2.812586] mmcblk1: mmc1:aaaa SB16G 14.8 GiB
[ 2.817131] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (237:0)
[ 2.828652] mmcblk0: p1
[ 2.831233] mmcblk1: p1 p2
[ 2.949539] EXT4-fs (mmcblk1p2): 1 orphan inode deleted
[ 2.954854] EXT4-fs (mmcblk1p2): recovery complete
[ 2.972087] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.980301] VFS: Mounted root (ext4 filesystem) on device 179:98.
[ 2.990231] devtmpfs: mounted
[ 2.994630] Freeing unused kernel memory: 1920K
[ 2.999292] Run /sbin/init as init process
[ 3.140425] systemd[1]: System time before build time, advancing clock.
[ 3.192601] NET: Registered protocol family 10
[ 3.198413] Segment Routing with IPv6
[ 3.234568] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 3.256819] systemd[1]: Detected architecture arm64.Welcome to Arago 2021.09![ 3.304697] systemd[1]: Set hostname to <am64xx-evm>.
[ 3.641517] systemd[1]: /lib/systemd/system/startwlansta.service:7: Unknown key name 'After' in section 'Service', ignoring.
[ 3.656391] systemd[1]: /lib/systemd/system/startwlanap.service:7: Unknown key name 'After' in section 'Service', ignoring.
[ 3.697896] systemd[1]: /lib/systemd/system/irqbalanced.service:6: Unknown key name 'ConditionCPUs' in section 'Unit', ignoring.
[ 3.741165] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[ 3.897132] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.908510] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 3.931952] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.940922] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 3.963916] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.972837] systemd[1]: Created slice system-syslog\x2dng.slice.
[ OK ] Created slice system-syslog\x2dng.slice.
[ 3.998102] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 4.020357] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ 4.044264] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[ 4.068195] systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
[ 4.084007] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 4.103991] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 4.120001] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.155387] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 4.180114] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 4.207931] systemd[1]: Listening on Process Core Dump Socket.
[ OK ] Listening on Process Core Dump Socket.
[ 4.232373] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 4.260039] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 4.269069] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 4.292725] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 4.308970] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 4.332802] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 4.356474] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 4.386092] systemd[1]: Mounting Huge Pages File System...Mounting Huge Pages File System...
[ 4.409858] systemd[1]: Mounting POSIX Message Queue File System...Mounting POSIX Message Queue File System...
[ 4.437828] systemd[1]: Mounting Kernel Debug File System...Mounting Kernel Debug File System...
[ 4.464410] systemd[1]: Mounting Temporary Directory (/tmp)...Mounting Temporary Directory (/tmp)...
[ 4.486893] systemd[1]: Starting Create list of static device nodes for the current kernel...Starting Create list of st…odes for the current kernel...
[ 4.517826] systemd[1]: Starting RPC Bind...Starting RPC Bind...
[ 4.532335] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.551002] systemd[1]: Starting Journal Service...Starting Journal Service...
[ 4.574763] systemd[1]: Starting Load Kernel Modules...Starting Load Kernel Modules...
[ 4.596110] systemd[1]: Starting Remount Root and Kernel File Systems...Starting Remount Root and Kernel File Systems...
[ 4.620214] cryptodev: loading out-of-tree module taints kernel.
[ 4.627463] systemd[1]: Starting udev Coldplug all Devices...Starting udev Coldplug all Devices...
[ 4.653400] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 4.658294] cryptodev: driver 1.10 loaded.
[ 4.667314] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[ 4.673942] systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
[ 4.699569] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 4.728794] systemd[1]: Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Debug File System.
[ 4.752820] systemd[1]: Mounted Temporary Directory (/tmp).
[ OK ] Mounted Temporary Directory (/tmp).
[ 4.780828] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Started Create list of sta… nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Remount Root and Kernel File Systems.Mounting Kernel Configuration File System...Starting Flush Journal to Persistent Storage 4.905963] random: systemd-journal: uninitialized urandom read (16 bytes read)
0m...
[ 4.928251] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.931898] systemd-journald[167]: Received client request to flush runtime journal.Starting Apply Kernel Variables...
[ 4.955239] random: systemd-journal: uninitialized urandom read (16 bytes read)Starting Create Static Device Nodes in /dev...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).Mounting /media/ram...Mounting /var/volatile...Starting udev Kernel Device Manager...
[ OK ] Mounted /media/ram.
[ OK ] Mounted /var/volatile.Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems.Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Started udev Kernel Device Manager.Starting Network Time Synchronization...Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started udev Coldplug all Devices.Starting udev Wait for Complete Device Initialization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
[ OK ] Reached target System Time Synchronized.
[ 5.991123] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.136748] random: crng init done
[ 6.140273] random: 64 urandom warning(s) missed due to ratelimiting
[ 6.172789] CAN device driver interface
[ OK ] Started Load/Save Random Seed.
[ 6.206129] 93xx46 spi1.0: 16-bit eeprom
[ OK ] Created slice system-systemd\x2dbacklight.slice.Starting Load/Save Screen …ess of backlight:ssd1307fb0...
[ OK ] Started Load/Save Screen B…tness of backlight:ssd1307fb0.
[ 6.463943] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@a4000000
[ 6.505284] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode
[ 6.532927] davinci_mdio 300b2400.mdio: Configuring MDIO in manual mode
[ 6.548395] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device
[ 6.562722] remoteproc remoteproc0: 5000000.m4fss is available
[ 6.579421] remoteproc remoteproc0: powering up 5000000.m4fss
[ 6.585955] remoteproc remoteproc0: Booting fw image am64-mcu-m4f0_0-fw, size 86084
[ 6.588323] remoteproc0#vdev0buffer: assigned reserved memory node m4f-dma-memory@a4000000
[ 6.588551] remoteproc0#vdev0buffer: registered virtio0 (type 7)
[ 6.588562] remoteproc remoteproc0: remote processor 5000000.m4fss is now up
[ 6.590888] davinci_mdio 300b2400.mdio: davinci mdio revision 1.7, bus freq 1000000
[ 6.638743] davinci_mdio 300b2400.mdio: phy[15]: device 300b2400.mdio:0f, driver TI DP83869
[ 6.650757] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 6.651072] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
[ 6.664319] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
[ 6.781380] platform 78000000.r5f: configured R5F for remoteproc mode
[ 6.801521] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000
[ 6.810586] remoteproc remoteproc1: 78000000.r5f is available
[ 6.819596] remoteproc remoteproc1: powering up 78000000.r5f
[ 6.825710] remoteproc remoteproc1: Booting fw image am64-main-r5f0_0-fw, size 86352
[ 6.829856] platform 78200000.r5f: configured R5F for remoteproc mode
[ 6.838502] remoteproc1#vdev0buffer: assigned reserved memory node r5f-dma-memory@a0000000
[ 6.851492] virtio_rpmsg_bus virtio1: rpmsg host is online
[ 6.857288] remoteproc1#vdev0buffer: registered virtio1 (type 7)
[ 6.864202] m_can_platform 20701000.can: m_can device registered (irq=36, version=32)
[ 6.867759] remoteproc remoteproc1: remote processor 78000000.r5f is now up
[ 6.881360] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe
[ 6.898418] m_can_platform 20711000.can: m_can device registered (irq=38, version=32)
[ 6.907345] platform 78200000.r5f: assigned reserved memory node r5f-dma-memory@a1000000
[ 6.917662] remoteproc remoteproc2: 78200000.r5f is available
[ 6.938417] remoteproc remoteproc2: powering up 78200000.r5f
[ 6.944229] remoteproc remoteproc2: Booting fw image am64-main-r5f0_1-fw, size 141772
[ 6.959077] remoteproc2#vdev0buffer: assigned reserved memory node r5f-dma-memory@a1000000
[ 6.972359] virtio_rpmsg_bus virtio2: rpmsg host is online
[ 6.972762] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe
[ 6.978012] remoteproc2#vdev0buffer: registered virtio2 (type 7)
[ 6.999817] remoteproc remoteproc2: remote processor 78200000.r5f is now up
[ 7.050103] platform 78400000.r5f: configured R5F for remoteproc mode
[ 7.105767] platform 78400000.r5f: assigned reserved memory node r5f-dma-memory@a2000000
[ 7.150155] remoteproc remoteproc3: 78400000.r5f is available
[ 7.197907] remoteproc remoteproc3: powering up 78400000.r5f
[ 7.204152] remoteproc remoteproc3: Booting fw image am64-main-r5f1_0-fw, size 93260
[ 7.204235] platform 78600000.r5f: configured R5F for remoteproc mode
[ 7.207641] remoteproc3#vdev0buffer: assigned reserved memory node r5f-dma-memory@a2000000
[ 7.208361] virtio_rpmsg_bus virtio3: rpmsg host is online
[ 7.208416] remoteproc3#vdev0buffer: registered virtio3 (type 7)
[ 7.208424] remoteproc remoteproc3: remote processor 78400000.r5f is now up
[ 7.209095] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe
[ 7.263812] platform 78600000.r5f: assigned reserved memory node r5f-dma-memory@a3000000
[ 7.285572] remoteproc remoteproc5: 30034000.pru is available
[ 7.331209] remoteproc remoteproc6: 30004000.rtu is available
[ 7.352456] remoteproc remoteproc4: 78600000.r5f is available
[ 7.394959] remoteproc remoteproc7: 3000a000.txpru is available
[ 7.412378] remoteproc remoteproc4: powering up 78600000.r5f
[ 7.412403] remoteproc remoteproc4: Booting fw image am64-main-r5f1_1-fw, size 91520
[ 7.413409] remoteproc4#vdev0buffer: assigned reserved memory node r5f-dma-memory@a3000000
[ 7.445712] virtio_rpmsg_bus virtio4: rpmsg host is online
[ 7.455906] remoteproc4#vdev0buffer: registered virtio4 (type 7)
[ 7.465694] remoteproc remoteproc4: remote processor 78600000.r5f is now up
[ 7.472854] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xe
[ 7.489592] remoteproc remoteproc8: 30038000.pru is available
[ 7.639034] remoteproc remoteproc9: 30006000.rtu is available
[ 7.697893] remoteproc remoteproc10: 3000c000.txpru is available
[ 7.748083] remoteproc remoteproc11: 300b4000.pru is available
[ 7.757641] remoteproc remoteproc12: 30084000.rtu is available
[ 7.771142] remoteproc remoteproc13: 3008a000.txpru is available
[ 7.782912] remoteproc remoteproc14: 300b8000.pru is available
[ 7.789821] remoteproc remoteproc15: 30086000.rtu is available
[ 7.804602] remoteproc remoteproc16: 3008c000.txpru is available
[ 9.369709] TI DP83869 300b2400.mdio:0f: attached PHY driver [TI DP83869] (mii_bus:phy_addr=300b2400.mdio:0f, irq=POLL)
[ 9.369728] icssg-prueth icssg1-eth: TI PRU ethernet driver initialized: single EMAC mode
[ 9.613838] usbcore: registered new interface driver usbfs
[ 9.636719] usbcore: registered new interface driver hub
[ 9.642266] usbcore: registered new device driver usb
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ OK ] Found device /dev/mmcblk1p1.Starting File System Check on /dev/mmcblk1p1...
[ OK ] Found device /dev/mmcblk0p1.
[ OK ] Started udev Wait for Complete Device Initialization.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Timer service to update the IP on OLED each 10s.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.Starting Docker Socket for the API.
[ OK ] Listening on dropbear.socket.Starting Reboot and dump vmcore via kexec...Starting File System Check on /dev/mmcblk0p1...
[ OK ] Listening on Docker Socket for the API.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Job spooling tools.
[ OK ] Started Periodic Command Scheduler.
[ OK ] Started D-Bus System Message Bus.Starting Ethernet Bridge Filtering Tables...Starting Print notice about GPLv3 packages...Starting IPv6 Packet Filtering Framework...Starting IPv4 Packet Filtering Framework...
[ OK ] Started irqbalance daemon.Starting Matrix GUI...Starting startwlanap...Starting startwlansta...Starting System Logger Daemon "default" instance...Starting Login Service...
[ OK ] Started TEE Supplicant.Starting telnetd.service...
[ OK ] Started File System Check on /dev/mmcblk1p1.
[ OK ] Started Reboot and dump vmcore via kexec.
[ OK ] Started Ethernet Bridge Filtering Tables.
[ OK ] Started IPv6 Packet Filtering Framework.
[ OK ] Started IPv4 Packet Filtering Framework.
[ OK ] Started Matrix GUI.
[ OK ] Started startwlansta.
[ OK ] Started startwlanap.
[ OK ] Reached target Network (Pre).Mounting /run/media/mmcblk1p1...Starting Network Service...
[ OK ] Started File System Check on /dev/mmcblk0p1.
[ OK ] Started telnetd.service.
[ OK ] Mounted /run/media/mmcblk1p1.Mounting /run/media/mmcblk0p1...Starting LSB: Expand Rootfs of boot device...Starting syslog.service...
[ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[ 11.122873] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ OK ] Mounted /run/media/mmcblk0p1.
[ OK ] Started System Logger Daemon "default" instance.
[ 11.288253] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.326322] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ OK ] Started Network Service.Starting Wait for Network to be Configured...Starting Network Name Resolution...
[ 11.575250] remoteproc remoteproc11: powering up 300b4000.pru
[ 11.607600] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-sr2-pru0-prueth-fw.elf, size 38224
[ 11.619847] remoteproc remoteproc11: unsupported resource 5
[ 11.631798] remoteproc remoteproc11: remote processor 300b4000.pru is now up
[ 11.639894] remoteproc remoteproc12: powering up 30084000.rtu
[ 11.663895] remoteproc remoteproc12: Booting fw image ti-pruss/am65x-sr2-rtu0-prueth-fw.elf, size 30872
[ 11.728680] remoteproc remoteproc12: remote processor 30084000.rtu is now up
[ 11.762590] remoteproc remoteproc13: powering up 3008a000.txpru
[ OK ] Started syslog.service.
[ 11.823575] remoteproc remoteproc13: Booting fw image ti-pruss/am65x-sr2-txpru0-prueth-fw.elf, size 37328
[ 11.892935] remoteproc remoteproc13: remote processor 3008a000.txpru is now up
[ OK ] Started LSB: Expand Rootfs of boot device.
[ 12.003024] pps pps1: new PPS source ptp2
[ 12.023800] net eth2: started
[ 12.153183] am65-cpsw-nuss 8000000.ethernet eth1: PHY [0.1:03] driver [TI DP83869] (irq=POLL)
[ 12.207822] am65-cpsw-nuss 8000000.ethernet eth1: configuring for phy/rgmii-rxid link mode
[ 12.313632] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 12.387589] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ OK ] Started Login Service.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.Starting Avahi mDNS/DNS-SD Stack...Starting Enable and configure wl18xx bluetooth stack...
[ OK ] Started NFS status monitor for NFSv2/3 locking..Starting Simple Network Ma…ent Protocol (SNMP) Daemon....Starting Permit User Sessions...
[ OK ] Started Vsftpd ftp daemon.
[ OK ] Started Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS1.
[ OK ] Started Serial Getty on ttyS2.
[ OK ] Reached target Login Prompts.Starting Synchronize System and HW clocks...
[FAILED] Failed to start Synchronize System and HW clocks.
See 'systemctl status sync-clocks.service' for details.
[ OK ] Started Enable and configure wl18xx bluetooth stack.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Simple Network Man…ement Protocol (SNMP) Daemon..
***************************************************************
***************************************************************
NOTICE: This file system contains the following GPLv3 packages:autoconfbashbcbinutilscifs-utilscoreutils-stdbufcoreutilscpiocpp-symlinkscppdosfstoolselfutilsg++-symlinksg++gawkgcc-symlinksgccgdbgdbservergettextgstreamer1.0-libavgziphidapilesslibasm1libbfdlibdw1libelf1libgdbm-compat4libgdbm6libgettextliblibgettextsrclibgmp10libidn2-0libmpc3libmpfr6libreadline8libunistring2m4makenettlepartedtarwhichIf you do not wish to distribute GPLv3 components please remove
the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:opkg remove <package>
Where <package> is the name printed in the list aboveNOTE: If the package is a dependency of another package youwill be notified of the dependent packages. You shoulduse the --force-removal-of-dependent-packages option toalso remove the dependent packages as well
***************************************************************
***************************************************************
[ OK ] Started Print notice about GPLv3 packages._____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_||___| |___|Arago Project am64xx-evm ttyS2Arago 2021.09 am64xx-evm ttyS2